Avaya 1600 manual Configure Dhcp Server, Default Interworking Connections, Enable/Disable Dhcp

•ATM Slot - ATM slot number for this ID.

•VPI - the ATM virtual path identifier (VPI) for this ID.

•VCI - the virtual circuit identifier (VCI) for this ID.

For more information about a connection, type the ID number, and then press ENTER.

4.Default Interworking Connections

Restores the default interworking connections.

D.Configure DHCP Server

Displays the DHCP Server Configuration Menu, which contains the following commands to configure DHCP.

DHCP dynamically assigns an IP address to all devices connected to the PARTNER ACS 1600 DSL module. You must select the Ethernet Interface to correctly use the following commands.

You must restart the PARTNER ACS 1600 DSL module for the changes to take effect. For more information on restarting the PARTNER ACS 1600 DSL module or on upgrading your software using TFTP, see the “PARTNER ACS 1600 DSL module basics” chapter.

E. Enable/Disable DHCP

Enables and disables DHCP.

B. Enable/Disable DHCP Debug Messages

For factory use only.

I. Configure DHCP Server Parameters

Sets the DHCP server parameters.

Type the number of the Interface, the number of the port, the following information, and then press ENTER:

•Gateway IP address

•DNS Server IP address

•NetBIOS Server IP address

•Subnet Mask

•Domain Name

•DHCP Lease Time

Avaya, Inc. - 66 - PARTNER ACS 1600 DSL module User Guide