2.Select Enable/Disable Spanning Tree Globally, and the type E.

The Bridge Configuration Menu redisplays.

You must restart the PARTNER ACS 1600 DSL module for any changes to take effect. For more information on restarting the PARTNER ACS 1600 DSL module, see the “Getting started” chapter.

Enabling STP by port

To enable STP by port:

1.On the Main Menu, select Configure Bridge.

The Bridge Configuration Menu displays.

*****************************************

* Bridge Configuration Menu *

*****************************************

G. Enable/Disable Bridging Globally P. Enable/Disable Bridging by Port A. Configure Bridge Aging Timer

T. Enable/Disable Spanning Tree Globally O. Enable/Disable Spanning Tree by Port

R. Configure Spanning Tree Bridge

Priority

Q. Configure Spanning Tree Port Priority H. Configure Spanning Tree Hello Time S. Configure Spanning Tree Max Age

F. Configure Spanning Tree Forward Delay C. Configure Spanning Tree Path Cost

D. Delete Bridge Forwarding Database Entry

2.Select Enable/Disable Spanning Tree by Port. The following instructions display on-screen:

Available Interfaces :

1.SDSL

2.10/100BaseT Ethernet

3.Universal Serial

0.(Abort)

Selection :

Interfaces may or may not display, depending on the IAD in use.

Avaya, Inc.

- 149 - PARTNER ACS 1600 DSL module User Guide

Page 150
Image 150
Avaya 1600 manual Enabling STP by port, Bridge Configuration Menu