Avaya 1600 manual Display the filter in the copy buffer

•Filter Destination Port High

The PARTNER ACS 1600 DSL module displays a default or last-used value in parentheses to the left of the command prompt. To accept this value, press

ENTER.

C. Copy filter operations menu

Displays the IP Filter Copy to Buffer Menu, which contains the following commands for all filters of the type that you set with the Toggle input or output type filters to view/edit command.

C. Copy a filter of the chosen type to the buffer

Copies the filter that you select to the buffer. Type the number of the filter to copy, and then press enter.

D. Display the filter in the copy buffer

Displays the following information about the filter in the copy buffer:

•num – number of the filter

•state – Idle or Active

•action – Pass or Discard

•srcLwP - Filter Source Port Low – TCP or UDP packets only

•srcHiP - Filter Source Port High - TCP or UDP packets only

•source.ip.addr.low - Filter Destination IP Low Address

•source.ip.addr.high - Filter Source IP High Address

•proto - Filter protocol – IP, ICMP, IGMP,

TCP, UDP

•mask – ICMP or TCP only

•dstLwP - Filter Destination Port Low

•dstHiP - Filter Destination Port High

•dest.ip.addr.low - Filter Destination IP Low Address

•dest.ip.addr.high - Filter Destination IP High Address

Avaya, Inc. - 37 - PARTNER ACS 1600 DSL module User Guide