Avaya 1600 manual Enabling RIP poisoned reverse, Router Configuration Menu redisplays

5.Type the new IP address, or press ENTER to select the current IP address.

The following instructions display on-screen:

Current subnet mask = 0.0.0.0

Enter new subnet mask for this interface:

6.Type the new subnet mask address, or press ENTER to select the current subnet mask.

The following instructions display on-screen:

Select priority Normal/High [N/H] (N):

7.Do one of the following, and then type Y:

To give the interface high priority, type H.

To give the interface normal priority, type N.

The Router Configuration Menu redisplays.

8.Repeat steps 1-6 for each port for which you want to configure an IP address.

You must restart the PARTNER ACS 1600 DSL module for any changes to take effect. For more information on restarting the PARTNER ACS 1600 DSL module, see the “Getting started” chapter.

Enabling RIP poisoned reverse

When you enable RIP, the PARTNER ACS 1600 DSL module sends routing data to other adjacent routers and dynamically “learns” the associated network topology.

For RIP to work, you must enable RIP globally or locally (by port), and then setting the RIP version. The order in which you perform the procedures is irrelevant.

Avaya, Inc. - 130 - PARTNER ACS 1600 DSL module User Guide