Avaya 1600 manual WAN configuration, Changing Datalink Protocol

6. WAN configuration

This chapter details how to configure the PARTNER ACS 1600 DSL module for both data and voice operation. To do so, you must:

Configure the datalink protocol

Configure the physical interface **

Configure ATM PVCs and ATM options (Datalink

protocol = ATM)

Configure Frame Relay DLCIs and Configure Frame

Relay options (Datalink protocol = Frame Relay)

Configure the voice path

For the PARTNER ACS 1600 DSL module , you can also use the Quick Configuration command to configure the physical interface. For more information, see the “Quick Configuration” section later in this chapter.

Voice and data traffic area each carried in their own PVCs (protocol = ATM) or DLCI (protocol = Frame Relay). The data payload in the PVC/DLCI identifies the voice ports and you can define up to 8 data ports.

For more information on the menus, submenus and commands in this chapter, see the “Menu interface” chapter.

Changing the

Datalink

Protocol

To change the datalink protocol:

1.On the Main Menu, select Configure WAN. The WAN Configuration Menu displays.

*****************************************

* WAN Configuration Menu *

*****************************************

1.Configure Datalink Protocol

2.Configure Physical Interface

3.Configure DLCIs

4.Configure FR Options

Avaya, Inc. - 101 - PARTNER ACS 1600 DSL module User Guide