Avaya 1600 manual ATM Encapsulation Configuration submenu displays

6.Type a VCI between 32 – 65535 (default = 38 – data or 39

– voice), and then press ENTER.

The ATM Encapsulation Configuration submenu displays.

*****************************************

* ATM Encapsulation Configuration *

*****************************************

Current Encapsulation : NONE

1.AAL5 (None)

2.AAL0 (None)

3.Proprietary Voice

4.RFC 1483 (using VC Muxing)

5.RFC 1483 (with LLC Encapsulation)

6.RFC 2364 (PPPoATM with LLC Encapsulation)

7.RFC 2364 (PPPoATM using VC Muxing)

7.Select the encapsulation you want to configure.

If you select RFC 2364 (PPPoATM with LLC Encapsulation) or RFC 2364 (PPPoATM using VC Muxing), follow the on-screen messages to set the PPP authorization type. Once complete, continue with step 8.

The ATM Service Category Configuration submenu displays.

*****************************************

* ATM Service Category Configuration *

*****************************************

1.CBR

2.UBR

8.Do one of the following:

Select CBR for high priority data.

Select UBR for low priority data.

9.Follow the on-screen messages to set the Peak Cell Rate (PCR) value.

You must restart the PARTNER ACS 1600 DSL module for any changes to take effect. For more information on restarting the PARTNER ACS 1600 DSL module, see the “Getting started” chapter.

Avaya, Inc. - 111 - PARTNER ACS 1600 DSL module User Guide