Kyocera DP-3600 manual Configuring Interfaces, Parallel Interface

Configuring Interfaces

Configuring Interfaces

The printer is equipped with both a parallel and serial interface. Independent settings can be made for each interface. Optional interfaces can also be installed.

To configure each interface, press the MODE key and use the + or – key to select the interface you wish to make settings for.

Note______________________________________________________________________

This interface selection does not select which interface data will be received from. The printer automatically selects that interface.

Parallel Interface

The parallel interface mode of this printer supports a bi-directional/high-speed mode. Normally, this interface is used under the default setting Nibble (high), see Appendix C. After setting the interface, be sure to reset the printer or turn the power off at least once. The new setting will be enabled thereafter.

2-27