![](/images/new-backgrounds/1172391/172391259x1.webp)
Chapter 2 Operating the Page Printer
Adjusting the Print Density
If necessary, the print density can be adjusted from the Mode Select Menu. The required print density can be selected from five different steps (01 โ 05). The factory setting is 03, and there is normally no need to alter this setting.
When using the KIR 2 function, please use the โ 03โ setting. For details on adjusting the KIR 2 mode, see page
Setting the Audio Warning (Buzzer)
In addition to the message displayed when the paper supply is exhausted, or when paper jamming occurs, an audio warning is made to sound. This is useful, for example, when the printer is in a location some distance from the user.
The audio alarm is set to On when leaving the factory. The buzzer will sound according to the type of printer error as given in the following table.
The buzzer does not sound if the buzzer setting is set to Off.