Chapter 2 Operating the Page Printer
3.Press the 4 key after selecting the paper type you want to customize. Pressing the + or - keys will cycle through a display of the submenus given in the table below.
Submenus displayed | Selection parameters | Description |
|
|
|
>>Paper weight | Light(Thin) | Sets the paper thickness |
| Normal (default) |
|
| Heavy (Thick) |
|
|
|
|
>>Fuser mode | Vellum | Sets the temperature for the fusing |
| Low | unit. |
| Middle (default) |
|
| High |
|
|
|
|
>>Duplex path | Enable (default) | Selects duplex printing on/off when |
(only when the paper type is | Disable | a |
Custom #) |
| only for the selected paper type) |
|
|
|
Display the submenu to be set and press the ENTER key. A ? will flash. Press the + or - keys to select the desired parameter.
>>Paper weight |
|
? Normal | (Example: Setup menu for Paper weight) |
Press the CANCEL key if you want to cancel the setting. The ? will disappear.
