Chapter 1 Safeguards and Installing the Page Printer
Paper feed cassette position
Paper Guide
: Paper Size Indicator Position
Paper Stopper
Paper Guide
Front Side
Note: Be sure to remove the size indicator plates which are temporarily attached before 
using the printer.
1.Pull out the paper feed cassette until it stops.
2.Open the paper feed roller located on the right side of the cassette until it stops as shown in the figure.
3.Next, adjust the position of the paper stopper located on the left side of the cassette. While holding down the lever (green) on the paper guide, slide the paper stopper to the desired paper size.
4.Adjust the position of the paper guides located at the front and rear of the paper feed cassette. Align the paper guides to the desired paper size by pressing the knobs (green) on the paper guides so they slide.
