Kyocera DP-3600 manual Indicators and Messages

Chapter 5 Troubleshooting

Indicators and Messages

This section explains the indicators on the control panel and the messages which appear in the message display and the appropriate corrective action to take in each case.

Indicators

Indicator	Condition	Corrective Action
		The printer has run low on toner. The toner should be replaced
	Flashing	as soon as possible. Clean the printer after replacement. (See
		Chapter 4.)
	Lit	Toner is low or has run out. Replace with a new toner
		container. (See Chapter 4.)
	Fast Flashing	Paper is jammed in the location flashing.
	Slow Flashing	The paper has run out in the paper cassette or multi-purpose
		tray. Add paper to the paper feed source. (See Chapter 1.)
	Lit	This indicates either the current paper feeder or the paper
		output point.
		A paper jam has occurred in the optional duplex printing unit
	Flashing	(AD-31). Remove the paper jam referring to the instruction
		manual for the AD-31.
	Lit	An optional duplex printing unit (AD-31) has been attached,
		and the printer is printing in duplex printing mode.
	Flashing	The printer is warming up (Please wait) or the printer has
		insufficient memory available. Confirm the message indicated
		on the message display.
ATTENTION		A message will be displayed in the message display. Take
	Lit	corrective action according to the message displayed. The
		table on the following page lists the corrective action to take in
		response to each message.

5-8