Operating Procedures

Feed Selection

Use the FEED key to select whether to feed paper from one of the paper feed cassettes or from the multi-purpose tray. If optional paper feeders (ST-1000 or EF-100) are installed, any of these can also be selected.

The FEED key can be used whenever the message display indicates Ready or Add paper.

Press the FEED key. The selection cycles and is momentarily displayed in the message display as:

Cassette 1

(Paper feeder's top cassette)

Cassette 2

(Paper feeder's bottom cassette)

Cassette 3

(Displayed when an optional feeder is installed [upper

 

cassette])

Cassette 4

(Displayed when an optional feeder is installed [lower cassette])

Cassette 5

(Displayed when a second optional feeder is installed [upper

 

cassette])

Cassette 6

(Displayed when a second optional feeder is installed [lower

 

cassette])

EF

(Displayed when an EF-100 is installed)

MP tray

(Printer's multi-purpose tray)

The paper size and media type set for the paper source are also displayed in addition to the above displays.

The cassette indicator corresponding to the selected cassette on the control panel will flash. Selecting the paper feeder (ST-1000) cassette will also light the ready indicator on the front of that cassette.

Paper feed selections can also be made using the PRESCRIBE 2e PSRC command.

2-15

Page 83
Image 83
Kyocera DP-3600 manual Feed Selection