Appendix B Paper Selection

Specifications for each type of special paper are given below.

Colored Paper

Colored paper should meet the same specifications as listed for white bond paper in page B-3. In addition, the pigments used in the paper must be able to withstand the temperature of the printer’s fusing process (approximately 200°C [392°F]).

Preprinted Paper

The paper base of preprinted paper should meet basic specifications. The preprinted ink must be able to withstand the temperature of the printer’s fusing process (approximately 200°C [392°F]), and do not use paper with any kind of surface treatment, such as the type of paper commonly used for calendars.

Overhead Projection (OHP) Film

OHP film must be able to withstand the heat of fusing during the printing process. Specifications are as follows.

OHP Film Specifications

Item

Specification

Tolerance of heat

Must be able to withstand the temperature of the

 

printer’s fusing process (approximately 200°C [392°F]).

Thickness

0.100 to 0.110 mm (3.9 to 4.3 mils)

Material

Polyester

Squareness of corners

90° ±0.2°

Note______________________________________________________________________

Do not use film made from anything other than polyester.

B-10

Page 218
Image 218
Kyocera DP-3600 manual Colored Paper, Preprinted Paper Overhead Projection OHP Film