Dumping Received Data

Dumping Received Data

It is possible to print data received by the printer as hexadecimal code for the purposes of debugging programs and files.

1. Pressing the ENTER key once while >Print HEX-DUMP is shown on the message display will cause a ? to flash.

2.Send data to be dumped to the printer while the ? is flashing.

3.Pressing the ENTER key again will print the corresponding pages of dumped data. Once the dumped data you require has been output, it is possible to cancel the printing of any further dumped data by taking the printer offline by pressing the ON LINE key and then pressing the CANCEL key.

4.Once all data has been received, the message Waiting will appear. Press the FORM FEED key to finish printing.

2-57

Page 125
Image 125
Kyocera DP-3600 manual Dumping Received Data