Kyocera DP-3600 manual H4 Parity

RS-232C/RS-422A Protocol

H4: Parity

Parameter value	Meaning
0	None
1	Odd
2	Even
3	Ignore

The factory setting is “None” (0 on the status printout).

H5: Protocol logic

Parameter value Meaning

0Combination of 1 and 3 below

1DTR/DSR, positive logic

2DTR/DSR, negative logic

3XON/XOFF

4ETX/ACK

5XON/XOFF recognized only as protocol

The factory setting is 0.

Note______________________________________________________________________

Since DTR/DSR protocol is not used with the RS-422A standard, select a parameter value other than 0, 1, or 2 for the H5 setting when using the RS-422A interface.

H6: Buffer nearly-full threshold

This is a percentage from 0 to 99. The factory setting is 90.

C-15