Indicators and Messages
Message | Corrective Action |
Warning | The printer’s internal memory is running low. |
Low memory | Remove any unnecessary download fonts and/or macros. You can check the |
| |
| amount of user memory currently available by printing a status page. |
|
|
Toner low | There is not enough toner inside the toner container. |
| There is not enough toner. Prepare a new toner container. (See Chapter 4.) |
|
|
Replace Toner | There is no more toner in the toner container. |
Clean printer | The printer has stopped because there is no more toner. Replace with a new |
| |
| toner kit. After replacing, be sure to clean the printer. (See Chapter 4.) |
|
|
Option interface | A failure has occurred with the option interface. |
Error | Check the option interface installed on the printer. |
| |
HARDDISK error20 | Install the harddisk unit into the OPT2 slot. |
| This message is displayed when the optional harddisk unit is accidentally |
| installed into the OPT1 slot. Be sure to install the harddisk unit in the OPT2 |
| slot. Be sure to turn off the printer’s power before removing the incorrectly |
| installed harddisk. |
RAM DISK error ## | Check the error code displayed in the place of ## and refer to the |
Press CONTINUE | appropriate description below. |
| 01: Abnormal format. Try turning the power off and on again. |
| 02: RAM DISK mode is Off. Turn RAM DISK mode On. |
| 03: Cannot write to the disk system because it is write protected. Remove |
| the write protection. |
| 04: No disk space. Clean up files. |
| 05: Specified file not on disk. |
| 06: No memory for use by disk system. Expand printer memory. |
| 10: Cannot format disk because host data is spooled there. |
| Format the disk after Ready is displayed. |
|
|
| (Continued on next page) |
