|
| Print Quality Problems |
|
|
|
|
|
|
|
|
|
| Printed Results | Corrective Action |
|
|
| Clean the main charger wire. |
|
|
| Open the printer’s side cover. Pull the green main charger |
|
|
| wire cleaning knob slowly in and out a few times. (See |
|
|
| Chapter 4.) |
|
|
| Check the main charger unit installation. |
|
|
| Open the printer’s side cover. Remove the main charger unit |
|
|
| half way out, then reinstall it properly. (See Chapter 4.) |
|
| Dirt on the top edge or back of the paper | Check the transfer roller. |
|
|
| Pull out the paper feed unit and check whether the transfer |
|
|
| roller is dirty. If so, print several pages to eliminate the dirt. |
|
|
| Check the paper feed unit. |
|
|
| Pull out the paper feed unit and check whether the inside of |
|
|
| the printer is soiled with toner. If so, wipe it clean using the |
|
|
| supplied cleaning cloth. |
|
|
|
|
|
| Characters out of position. | Check the file or program. |
|
|
| See if the problem is caused by an error with PRESCRIBE 2e |
|
|
| commands. If the problem occurs only with a specific file or |
|
|
| program, the most likely cause is an error in a parameter to a |
|
|
| command or command syntax. |
|
|
|
|
|
