Kyocera DP-3600 manual Paper type user setting

Setting the Paper Type

Paper type user setting

The following describes the procedure used to set a user-defined paper type for the printer. Eight custom user settings may be registered. After having been set, any of these may be called up when setting the paper type for a paper source.

1.Display Paper handling > on the printer's Mode Select Menu and press the 4 key. Then use the + and - keys to display >Custom setup.

Paper handling >

>Custom setup >

Custom #

2.Pressing the ENTER key will cause a ? to be displayed. Press the + or - keys to select the paper type (see page 2-51) that you want to customize and then press the ENTER key.

>Custom setup

? Custom #

Note______________________________________________________________________

Note that if you change the setting for a paper type other than Custom 1 through 8 the paper type setting for each paper source set to that paper type will be changed.

2-53