JVC RX-1024VBK manual Creating Your Own SEA Mode Also see, Basic Settings

Using the On-Screen Menus

Creating Your Own SEA Mode (Also see page 27)

1.Press any button of ON SCREEN CONTROL % / Þ/ @/ #once. The MAIN MENU appears on the TV.

2.Press ON SCREEN CONTROL % / Þ to move to “SOUND CONTROL,” then press @ / #.

The SOUND CONTROL menu appears.

3.Press ON SCREEN CONTROL %/ Þ to move to “SEA,” then press @ / #. The SEA menu appears.

4.Press ON SCREEN CONTROL %/ Þ to move to “SEA ADJUST,” then press @ / #.

The SEA ADJUST menu appears.

5.Press ON SCREEN CONTROL % / Þ / @/ # to adjust the SEA mode as you want.

@/ # : Select the frequency ranges.

%/ Þ: Adjust the frequency levels.

6.Press SET to store the setting into the SEA USERMODE.

• If you press EXIT, without pressing SET in this step, you can return to the SEA menu. (The adjustment you have made is active but not stored.)

7.When you finish, press EXIT repeatedly until the menu disappears from the TV.

Basic Settings

1.Press any button of ON SCREEN CONTROL % / Þ/ @/ #once. The MAIN MENU appears on the TV.

2.Press ON SCREEN CONTROL %/ Þ to move to “SETTING,” then press

@/ #.

The SETTING 1 or SETTING 2 menu appears.

3.Press ON SCREEN CONTROL %/ Þ to the setting item you want to adjust.

•To go to the SETTING 2 menu, move to “NEXT PAGE,” then press @ / #.

•To go back to the SETTING 1 menu, move to “PREVIOUS PAGE,” then press @ / #.

On the SETTING 1 and 2 menus, you can do the following:

“SUBWOOFER”:	Set the subwoofer information (See page 18).
“FRONT SPK”:	Set the front speaker information ( See page 19).
“CENTER SPK”:	Set the center speaker information		(See page 19).
“REAR SPK”:	Set the rear speaker information (See page 19).
“CNTR DELAY”:	Adjust the delay time of the center speaker output (See page 20).
“REAR DELAY”:	Adjust the delay time of the rear speaker output (See page 20).
“CROSSOVER”:	Set the crossover frequency	(See page 20).
“LFE ATT.”:	Set the low frequency effect attenuator level (See page 21).
“COMP.”:	Set the dynamic range compression		(See page 21).
“DIGITAL 1/2/3”:	Set the digital input terminal	(See page 19).

MAIN MENU

MAIN MENU

SOURCE :VCR1￿

VISUAL :VCR1￿

MODE :OFF￿

￿

**	TUNERSOUND CONTROLCONTROL￿￿	**
**	SETTING ￿	**
**￿		**

￿:ENTER

VOLUME : 20

SOUND CONTROL menu

SOUND CONTROL

￿

** SURROUND LEVEL￿ **

**￿ SEA￿ **

BAL.:CNTR￿

LOUDNESS : OFF￿

INPUT ATT : NORMAL￿

SUBWFR LEVEL: 0dB￿ ￿

NEXT PAGE

							:ENTER
SEA menu
	SEA
	SEA MODE				:ROCK￿
	**￿	SEA ADJUST￿ **
	￿
	￿
	￿
	￿			￿
	￿		100			1k 10kHz

￿:OPERATE

SEA ADJUST menu

SEA ADJUST

SEA USERMODE

100 1k 10kHz

SET:MEMORY￿

SETTING 1 menu

SETTING 1
SUBWOOFER			: NO￿
FRONT		SPK	: LARGE￿
CENTER		SPK	: SMALL￿
REAR		SPK	: LARGE￿
CNTR DELAY			: 3msec￿
REAR DELAY			: 5msec￿
￿	￿ NEXT
**			PAGE	**

:ENTER

SETTING 2 menu

SETTING 2

CROSSOVER :100Hz￿

LFE ATT. : 0dB￿

COMP. : OFF￿

DIGITAL 1 : DBS￿

DIGITAL 2 : CD￿

DIGITAL 3 : MD￿

￿

** PREVIOUS PAGE **

￿￿

:ENTER

45