JVC RX-1024VBK manual To cancel the DAP mode, Press Surround Mode repeatedly until the mode you

Using the DSP Modes

4.Adjust the effect level.

1)Press BALANCE/SURROUND ADJUST repeatedly until “DSP EFFECT” appears on the display.

2)Turn MULTI JOG to select the effect level, while the indication of the previous step is still on the display. As you turn it, the effect level changes as follows:

DSP EFFECT 1 DSP EFFECT 2 DSP EFFECT 3

DSP EFFECT 5 DSP EFFECT 4

As the number increases, the selected DAP mode becomes stronger.

To cancel the DAP mode

Turn MULTI JOG until “DSP OFF” appears in step 2. The DSP indicator goes off from the display.

BALANCE/SURROUND

ADJUST

MULTI JOG

Note:

Once you have adjusted the DAP modes, the adjustment is memorized for each DAP mode.

From the remote control:

SURROUND

1. Press SURROUND MODE repeatedly until the mode you	MODE
want appears on the display.

The DSP indicator also lights up on the display.

Each time you press the button, the DSP modes change as follows (the indicator of the selected DSP mode also lights up on the display):

PRO LOGIC THEATER LIVE CLUB DANCE CLUB HALL

OFF

PAVILION

3D THEATER 3D DRAMA 3D ACTION HEADPHONE

When the digital input is selected to play the source encoded with Dolby

Digital:

DOLBY DIGITAL DIG-THEATER

OFF 3D DIGITAL HEADPHONE

If you need to make any adjustment, go to the following steps.

2. Press SOUND. SOUND

10 keys are activated for sound adjustments.

3. Adjust the speaker output levels as follows:	–	REAR · L +		–	REAR · R +
	5		ENTER 6	8	9

•To adjust the left rear speaker level, press REAR•L +/–.

•To adjust the right rear speaker level, press REAR•R +/–.

4.Press EFFECT to select the effect level.

Each time you press the button, the effect level changes as				EFFECT
follows:				7/P
DSP EFFECT 1	DSP EFFECT 2		DSP EFFECT 3
DSP EFFECT 5		DSP EFFECT 4

As the number increases, the selected DAP mode becomes stronger.

To cancel the DAP mode

Press SURROUND MODE repeatedly until “OFF” appears.

The DSP indicator goes off from the display.

Note:

The DAP mode is not used with the other DSP modes such as the 3D-PHONIC mode and the Surround mode. When the DAP mode is turned on, the other DSP mode, if used, will be turned off.

Note:

When you select “HEADPHONE,” you cannot go to the following steps. No adjustments can be made for “HEADPHONE.”

Note:

You cannot adjust the rear speaker levels when “REAR SPK” is set to “NONE” (see page 19).

Note:

Once you have adjusted the DAP modes, the adjustment is memorized for each DAP mode.

33