JVC RX-1024VBK manual Basic Settings, Digital Input Digital in Terminal Setting, Large

Basic Settings

Digital Input (DIGITAL IN) Terminal Setting

When you use the digital input terminals, you have to register what components are connected to which terminals (DIGITAL IN 1/2/3).

On the front panel only:

1. Press SETTING repeatedly until “DIGITAL IN”

appears on the display.	SETTING
The display changes to show the current setting.
DIGITAL 2 terminal setting

		VOLUME
DIGITAL 1 terminal setting	DIGITAL 3 terminal setting

MULTI JOG

2.Turn MULTI JOG to select the appropriate digital terminal setting, while the indication of the previous step is still on the display.

As you turn it, the display changes to show the following:

Ò1 DBS 2 DVD 3 CD Ò 1 MD 2 DVD 3 CD Ò 1 MD 2 DBS 3 CD

Ò1 MD 2 DBS 3 DVD Ò 1 CD 2 DVD 3 MD Ò1 CD 2 DBS 3 MD

Ò1 CD 2 DBS 3 DVD Ò 1 DVD 2 CD 3 MD Ò 1 DVD 2 DBS 3 MD

Ò1 DVD 2 DBS 3 CD Ò 1DBS 2 CD 3 MD ÒDBS 2 DVD 3 MD

Ò(back to the beginning)

Setting the Speakers for the DSP Modes

To obtain the best possible surround sound of the DSP modes, you have to register the information about the speakers arrangement after all connections are completed.

Front, Center, and Rear Speaker Setting

Register the sizes of the other speakers.

On the front panel only:

1. Press SETTING repeatedly until “FRONT SPK” (Front
Speaker), “CENTER SPK” (Center Speaker) or “REAR	SETTING
SPK” (Rear Speaker) appears on the display.

Note:

When shipped from the factory, the DIGITAL IN terminals can be used as the digital input for the following components.

•DIGITAL 1 (coaxial): For DBS tuner

•DIGITAL 2 (optical): For DVD player

•DIGITAL 3 (optical): For CD player

Note:

When you change your speakers, you need to register the information about the speakers again.

The display changes to show the current setting.

2. Turn MULTI JOG to select the appropriate item about your front, center and rear speakers, while the indication of the previous step is still on the display.

As you turn it, the display changes to show the following:

MULTI JOG

Notes:

• If the size of the cone speaker

unit built in your speaker is

		LARGE	SMALL	NONE
LARGE	Select this when the speaker size is relatively large.
SMALL	Select this when the speaker size is relatively small.
NONE	Select this when you have not connected a speaker. (Not selectable
	for the front speakers)

greater than 4 3/4 inches (12

cm ), select “LARGE,” and if it

is smaller than 4 3/4 inches (12

cm ), select “SMALL.”

• If you have selected “NO” for

the subwoofer setting, you

can only select “LARGE” for

the front speaker setting.

19