JVC RX-1024VBK manual You want appears on the display, Press Effect to select the effect level

Using the DSP Modes

From the remote control:

1. Select and play the source encoded with Dolby Digital (bearing the mark

) or with Dolby Surround (bearing the mark DOLBY SURROUND ).

D I G I T A L

•When you play back the source encoded with Dolby Digital and select the digital input for that source, the Ù DIGITAL indicator lights up on the display.

2.Press SURROUND MODE repeatedly until the mode — 3D

ACTION (or 3D DIGITAL), 3D DRAMA, or 3D THEATER	SURROUND
	MODE
— you want appears on the display.

Each time you press the button, the DSP modes change as follows (the 3D-PHONIC and DSP indicators also light up on the display):

When the digital input is selected to play the source encoded with Dolby Digital:

DOLBY DIGITAL DIG-THEATER

OFF 3D DIGITAL HEADPHONE

For other sources:

PRO LOGIC THEATER LIVE CLUB DANCE CLUB HALL

OFF

PAVILION

3D THEATER 3D DRAMA 3D ACTION HEADPHONE

3. Press SOUND.

10 keys are activated for sound adjustments. SOUND

4. Press EFFECT to select the effect level.

Each time you press the button, the effect level changes as follows:				EFFECT
				7
DSP EFFECT 1	DSP EFFECT 2		DSP EFFECT 3
DSP EFFECT 5		DSP EFFECT 4

As the number increases, the selected 3D-PHONIC mode becomes stronger.

To cancel the 3D-PHONIC mode

Press SURROUND MODE repeatedly until “OFF” appears.

The 3D-PHONIC and DSP indicators go off from the display.

Note:

The 3D-PHONIC mode is not used with the other DSP modes such as the DAP mode and the Surround mode. When the 3D- PHONIC mode is turned on, the other DSP mode, if used, will be turned off.

Notes on the indications:

•The indicator of the selected DSP mode also lights up on the display while selecting.

•The PRO LOGIC indicator lights up when the Dolby Pro Logic decoder built in this receiver is activated.

•The Dolby Pro Logic decoder is used not only for the analog sources but also for the sources encoded with Dolby Digital in the following cases:

–When only front channel signals are encoded.

–When front channel and monaural rear channel

signals are encoded. While the Dolby Pro Logic is activated for this type of Dolby Digital source, the Ù DIGITAL indicator goes off.

Note:

Once you have adjusted the 3D- PHONIC modes, it is memorized for each 3D-PHONIC mode.

31