Troubleshooting

Use this chart to help you solve daily operational problems. If there is any problem you cannot solve, contact your JVC service center.

PROBLEM

POSSIBLE CAUSE

SOLUTION

 

 

 

The display does not light up.

The power cord is not plugged in.

Plug the power cord into an AC outlet.

No sound from speakers.

Speaker signal cables are not connected.

Check speaker wiring and

 

 

reconnect if necessary.

 

 

 

 

The SPEAKERS 1 and 2 buttons are not

Press SPEAKERS 1 and 2 correctly.

 

set correctly.

 

 

 

 

 

An incorrect source is selected.

Select the correct source.

 

 

 

 

Muting is activated.

Press MUTE to cancel the mute.

Sound from one speaker only.

Speaker signal cables are not connected properly.

Check speaker wiring and reconnect if necessary.

The balance is set to one extreme.

Adjust the balance properly (see page 18).

Continuous hiss or buzzing during FM reception.

Incoming signal is too weak.

Connect an outside FM antenna or contact your dealer.

 

The station is too far away.

Select a new station.

 

 

 

 

An incorrect antenna is used.

Check with your dealer to be sure

 

 

you have the correct antenna.

 

 

 

 

Antennas are not connected properly.

Check connections.

 

 

 

Occasional cracking noise during FM

Ignition noise from automobiles.

Move the antenna farther from

reception.

 

automobile traffic.

 

 

 

Howling during record playing.

Your turntable is too close to speakers.

Move speakers away from the turntable.

“OVERLOAD” starts flashing on the display.

Speakers are overloaded because of high volume.

Rotate the MASTER VOLUME control counterclockwise three or four times then press POWER on the front panel.

If “OVERLOAD” does not disappear, unplug the AC power cord, then plug it back again.

Speakers are overloaded because of short circuit of speaker terminals.

Press POWER on the front panel then check the speaker wiring. If “OVERLOAD” does not disappear, unplug the AC power cord, then plug it back again.

If speaker wiring is not short- circuited, contact your dealer.

Remote control does not work.

The remote control mode selector is not set correctly.

Set the selector correctly either to “AUDIO/TV/VCR,” “CATV” or “DBS.”

 

There is an obstruction in front of the

Remove the obstruction.

 

remote sensor on the receiver.

 

 

 

 

 

Batteries are weak.

Replace batteries.

 

 

 

68

Page 70 Page 72
Page 71
Image 71
JVC RX-1024VBK manual Troubleshooting, Problem Possible Cause Solution
Page 70 Page 72

RX-1024VBK specifications

The JVC RX-1024VBK is a sophisticated AV receiver designed to enhance the home entertainment experience. This multi-channel receiver is crafted to meet the demands of audio enthusiasts and casual listeners alike, delivering impressive sound quality and a variety of features that make it a standout option in its class.

One of the main features of the RX-1024VBK is its 5.1 channel surround sound capability. This means it can support up to five speakers and one subwoofer, allowing users to immerse themselves in a rich and dynamic audio environment. With a power output of 100 watts per channel, the receiver can fill a medium to large room with high-quality sound without distortion.

The RX-1024VBK incorporates advanced audio technologies such as Dolby Digital, DTS, and Virtual Surround. These surround sound formats provide an authentic cinematic experience by recreating the depth and clarity of audio found in movie theaters. Additionally, the receiver features a robust equalizer that allows users to customize audio settings to perfectly match their speaker configuration and personal preferences.

Connectivity is another strength of the JVC RX-1024VBK. It includes multiple HDMI inputs for connecting various devices like Blu-ray players, gaming consoles, and streaming devices. This functionality allows for convenient switching between sources, ensuring that users can enjoy their favorite content without hassle. The HDMI inputs also support 4K pass-through, enabling high-resolution video output and future-proofing the system for upcoming content.

The receiver also features built-in FM/AM radio with a preset capability, allowing users to save their favorite stations for easy access. An integrated USB port allows for direct playback of media files from USB drives, while line-in connections make it easy to connect older devices.

One notable feature is its sleek design, which fits well into any home audio setup. The user interface is intuitive, making navigation easy for all users.

Overall, the JVC RX-1024VBK combines performance, versatility, and aesthetic appeal, making it a solid choice for those looking to enhance their home entertainment system. With its blend of powerful audio technologies and user-friendly features, the RX-1024VBK is well-equipped to deliver an exceptional listening experience.
Top Page Image Contents