Chapter 2 Operating the Page Printer
Mode Selection Menu
This section explains the menu hierarchy used for all menus which can be set and selected using the MODE key. The MODE key can be used to display all of the menus in the table below. This mode selection menu conforms to the menu hierarchy given at the end of this manual.
Pressing the MODE key initially displays menus at the top of the hierarchy.
Use the + and – keys to move between menus in the same level. The + key shows the next menu, while the – key shows the previous one. Change levels by using the 3and 4keys. The 4key moves to lower levels
Mode Selection Menu List
Menu |
| Description | Default Setting |
Interface | > | Selects the interface for which settings are to be made. | Parallel |
|
| Settings from the mode select menu are applied to the |
|
|
| interface selected here. |
|
•
•
Depending on the computer connected, you can select | Nibble (high) |
from any of Nibble (high), Auto, Normal, |
|
High Speed. |
|
The following settings can be made for the serial |
|
interface. |
|
Baud rate | 9600 |
Data bit | 8 |
Stop bit | 1 |
Parity | None |
Protocol | DTR (pos.) & XON |
Barcode mode | Off |
