•Server ID: set the ID of the remote server
•Server password: set the password that must be used by the device manager to sync your device
•Access point: set an access point
•Host address: set the web address of the host server
•Port: set a port to use for the device manager
•User name: set a user name for this profile
•Password: set a user password for this profile
•Allow configuration: set to allow the server to configure your device
Managers
•
•Network authentication: set to require network authentication
4.When you are finished setting the options, press <Back>.
Start a configuration session
1.In Standby mode, press [ ] → Tools
→ Device mgr.
2.Scroll to a server profile and press <Options> → Start configuration.
3.Press <Yes> to confirm.
4.If required, scroll to an access point and press the trackball.
79