Samsung SGH-I550DKWTUR, SGH-I550DKFXSG Use name dialling, Search for contacts, → Voice Signal

Additional Programs

Use name dialling

1.In Standby mode, press [] → Tools

→ Voice Signal.

You will hear, “Say a command.”

2.After a beep, say “Call” and then a person’s name stored in Contacts.

3.If there are similar names, the device shows the 3 best candidates and then recites the name and number that most closely matches your command.

4.If the name or number is not the one you want, say “No,” and then repeat until you hear what you want.

5.When you hear the name you want, say “Yes.”

Search for contacts

1.In Standby mode, press [] → Tools

→ Voice Signal.

You will hear, “Say a command.”

2.After a beep, say “Look up” and then the full name of the contact card (first name followed by the last name).

3.If there are similar names, the phone displays the 3 best candidates and then recites the name and number that most closely matches your command.

4.If the name or type is not what you wanted, say “No”, and then repeat until you hear what you want.

5.When you hear the name you want, say “Yes.”

72