Managers

Protect a memory card with a password

Devices that do not support this feature, such as personal computers, cannot read the card while the password protection is active. Remove the password protection from the card to use it with those devices.

1.In Standby mode, press [ ] Organiser Memory.

2.Press <Options> Set password.

3.Enter and confirm a password (up to 8 characters).

4.To remove the password, press

<Options> Remove password. The device will prompt you to enter and confirm the password again.

View memory details

To view the used and available memory on your memory card,

1.In Standby mode, press [ ] Organiser Memory.

2.Press <Options> Memory details.

Connection manager

With Connection manager, you can view the details of data connections and close open connections.

View connection details

1.In Standby mode, press [ ] Connectivity Conn. mgr. Active data connections.

82