Whirlpool ETl6XK Moving the meat pan and cover... Removlng, Changing the light bulb, Shelves

Moving the meat pan and cover... Removlng:

1. Slide meat pan out to stop.

2. Lift the front of meat pan.

3 Slide pan the rest of the way out.

4. To remove cover, lift it straight up and out. Replaclng:

I. To replace cover, fit notches in cover sides over center shelf support.

2. Lower cover Into place.

3. To replace pan, fit edges of pan into supports on cover.

4. Slide meat pan into place.

Changing the light bulb.. .

WARNING: Before removing the light bulb, either unplug the refrigerator or disconnect

the electricity leading to the re- frigerator at the main power supply. Shock and injury can occur if elec- tricity remains connected.

Unplug the refrigerator first.

1.Reach behind control console to find bulb.

2.Remove bulb.

3.Replace with a 40-watt appliance bulb.

Removing crispers and crisper cover.. .

Removing the Crispers:

I, Slide crisper straight out to stop, lift front, then slide the rest of the way out.

2. Replace in the reverse order Removing Cover:

1.Lift front and remove the cover support

2.Lift out cover by pulling up and out.

Replacing Cover:

1.Fit back of cover into notch supports on walls of refrigerator, then lower front into place.

2.Replace cover support with the long tab towards the front. Note: If support needs adjustment, turn base right to lower, or left to raise.

Lift the Front, Then the Back.

I

I

Pull out to stop. +h- c-mt and Pull Again.

Removing the freezer shelf.. .

Lift the Front

Then the Back

1.Lift front slightly,

2.Lift back off supports.

3.Reolace in reverse order

Adjusting the refrigerator

I.First, remove food from shelf.

2. Slide shelf straight out to stop

3. Lift front.

4. Slide the rest of the way out.

shelves...

Guide Stop.

Shelt Stop

Replacing Shelf:

1, Fit back of shelf on top of guides with wire stops on the bottom of guides.

2. Lift front, slide shelf in until It clears guide stops.