Adaptec 2120S, 2200S manual Starts the notifier in configuration mode

Adaptec SCSI RAID 2120S/2200S Software User’s Guide

The notifier utility is named slightly differently depending on which operating system you are using. For all versions of Microsoft Windows the utility is named notify.exe, while for Novell NetWare it is named notify.nlm, and for all Linux and Unix variants it is named anotifyd.

All versions of the utility support the -cswitch. This switch runs the notifier in a configuration mode that leads you through the steps necessary to configure the system event log and e-mail notification.

In addition to -c, the Microsoft Windows version of the notifier supports the switches in Table 3-2.

	Table 3-2 Switches
-c	Starts the notifier in configuration mode.
-?	Lists the switches supported by the notifier.
-i	Install - installs the notifier service. The notifier is
	installed by default. If the service has been
	uninstalled for any reason, this switch will install the
	service and set it to start automatically from the next
	boot.
-u	Uninstall - removes the notifier service.
-v	Version - lists the version number of the notifier
	service.
-s	Start - starts the notifier service.

3-30