3-3
Adaptec Storage Manager-Browser Edition
Adaptec Storage Manager - Browser Edition consists of the three
major components:
A supported web browser, which should already be installed
on the system.
The Adaptec web service which supplies content displayed on
the web browser.
An Adaptec-supplied storage agent.
For a locally managed system, all three components will be
installed on the same system.
To support the remote management configurations described
below, all components must be installed on systems that have a
TCP/IP connection through which the other component(s) can be
accessed.
All communication uses Secure-HTTP (S-HTTP) or SSL protocols
to encrypt all data transmitted and ensure security. Connection
over an Ethernet network, a corporate WAN, or VPN are
supported.
Several remote management configurations are possible:
The browser will always be on a remote system.
The storage agent will always be installed on the system with
the storage controller installed.
The web service can be installed on the same remote system as
the browser, the system with the storage controller installed on
a third system.
The storage agent is supplied for all supported operating systems,
while the web service is available only for Windows and Linux. In
order for Adaptec Storage Manager - Browser Edition to manage
storage on a UNIX or NetWare system, the storage agent must
communicate with the Adaptec web service on a separate
Windows or Linux system.
In this configuration, the Windows or Linux system can either be
used to manage the RAID controller, or act as a server
communicating with a supported browser on a third system.
UG.book Page 3 Saturday, October 26, 2002 12:08 PM