Fujitsu M2488 manual Diagnostic Tests and Error Codes

M2488 PRODUCT GUIDE DIAGNOSTIC TESTS AND ERROR CODES

Table F-16. Routine 20 - Loop Write to Read Diagnostic Error Codes (Continued)

ROUTINE	TEST	TITLE	ERROR	DESCRIPTION
			CODE
0x20	0x17	LWR2 - Seismic SDFT Data Pat-	0x2D	Last Blk not Found
		tern
			0x2E	RSVP error - RSVP failed, cause unknown
			0x2F	IBG active, should not be - check INLWR
				pulled high.
			0x40	RSVP did not respond while looking for
				DBOB or IBG.
0x20	0x18	LWR2 - Seismic Good EDRC	0x20	RSVP failed to Respond
		Transfer
			0x21	DATA Xreg Miscompare - RSVP not Ready
			0x22	DATB Xreg Miscompare - RSVP not Ready
			0x23	FHC1 time-out - DBOB not detected by
				RSVP
			0x24	FLC0 time-out - RSVP detected Long IBG
			0x25	FHC2 or FLC2 Time Out - Slow End of Data
				Block
			0x26	Lost DBOB prior to PHOK or while waiting
				for DPOST
			0x27	PHOK not seen in time
			0x28	Time-out waiting for DPRE
			0x29	Lost DBOB waiting for DPRE
			0x2A	Time-out waiting for DPOST
			0x2B	PHOK on after Read End
			0x2C	RSVP Dead Man time-out
			0x2D	Last Blk not Found
			0x2E	RSVP error - RSVP failed, cause unknown
			0x2F	IBG active, should not be - check INLWR
				pulled high.
			0x40	RSVP did not respond while looking for
				DBOB or IBG.

DIAGNOSTIC TESTS AND ERROR CODES

April 1997 CG00000-011503 REV. A F-65