M2488 PRODUCT GUIDE INSTALLATION INSTRUCTIONS
April 1997 CG00000-011503 REV. A 1-7
1-5 EQUIPMENT INSPECTION
After unpacking, inspect the equipment. If any damage is found, note the type of damage and location.
Also note any damage to the packing container. Contact your carrier for further instructions for han-
dling the damaged equipment.
1-5.1 Inspect the M2488 Tape Drive
Visually examine the chassis for dents and cracks.
Upon completion, inspect the medium changer, if applicable, or continue with the assembly instruc-
tions.
1-5.2 Inspect the ACL
Visually examine the chassis for dents and cracks.
Upon completion, continue with the assembly instructions.
1-5.3 Inspect the FACL
Visually examine the chassis for dents and cracks.
Check the door lock by pressing on the lock lever and opening the door.
Check the carrier movement by rotating the carrier knob. Refer to the Controls and Indicators sec-
tion in Chapter 3 of the User’s Guide for the location of the knob.
Upon completion, continue with the assembly instructions.