Fujitsu M2488 manual Table E-1 CHK xx Error Code Descriptions

CHK XX ERROR CODES			M2488 PRODUCT GUIDE
		Table E-1.	CHK xx Error Code Descriptions (Continued)
	CHK XX		DESCRIPTION
	CODE
	6D	RRC CAN NOT BE DETERMINED
	6E	FILE PROTECT SENSOR FAILURE DURING POWER UP
	70	BACKWARD COMMAND AT BOT
	71	FORWARD COMMAND AT PEOT
	72	TIME OUT ERROR IN DECELERATION
	73	NOT READY BY OPERATOR
	74	TIME OUT ERROR IN FIRST MACHINE REEL WRAP
	75	TIME OUT ERROR IN ACCELERATION
	76	OVER SPEED IN ACCELERATION
	77	REVERSE ROTATION IN CONSTANT SPEED SERVO
	78	IN STOP LOCK SERVO FILE REEL TURNS TOO MUCH
	79	IN STOP LOCK SERVO MACHINE REEL TURNS TOO MUCH
	7A	RRC CHANGED BY TOO MANY COUNTS
	7B	TOO MANY MACHINE REEL INTERRUPTS
	7C	FILE REEL DIRECTION ERROR DURING UNLOADING
	7D	FILE REEL TURNS TOO FAST DURING UNLOADING
	7E	MACHINE REEL DIRECTION ERROR DURING UNLOADING
	7F	MACHINE REEL TURNS TOO FAST DURING UNLOADING
	82	MOUNT ARM MOVE FORWARD TIMEOUT ERROR DURING POWER UP
	83	MOUNT ARM MOVE BACKWARD TIMEOUT ERROR DURING POWER UP
	8E	MOUNT ARM MOVE FORWARD RETRY EXHAUSTED
	8F	MOUNT ARM MOVE BACKWARD RETRY EXHAUSTED
	90	MOUNT ARM HOME/DRIVE END & MAGAZINE END SENSORS ALL ON
	92	MOUNT ARM HOME/DRIVE END SENSORS BOTH ON
	93	MOUNT ARM HOME/MAGAZINE END SENSORS BOTH ON
	94	MOUNT ARM HOME SENSOR ALWAYS ON
	95	MOUNT ARM DRIVE END SENSOR ALWAYS ON
	96	MOUNT ARM MAGAZINE END SENSOR ALWAYS ON
	97	MOUNT ARM DRIVE & MAGAZINE END SENSORS BOT ON
	99	DOOR SOLENOID LOCK TIMEOUT ERROR
	9A	DOOR SOLENOID UNLOCK TIMEOUT ERROR

E-4 CG00000-011503 REV. A April 1997