Fujitsu M2488 manual Table F-8. Routine 6 Data Buffer Diagnostic Error Codes

DIAGNOSTIC TESTS AND ERROR CODES

DIAGNOSTIC TESTS AND ERROR CODES				M2488 PRODUCT GUIDE
Table F-6. Routine 4 - Read Signal Verification Processor Diagnostic Error Codes (Continued)
ROUTINE	TEST	TITLE	ERROR	DESCRIPTION
			CODE
0x04	0x08	RSVP Counters test - 2 byte mode	0x08	RSVP Interrupts not set as expected testing
				counter 0
			0x09	Register CECC data miscompare after reset-
				ting Response Available testing counter 0
0x04	0x09	RSVP DBOB Interrupt test	0x01	Timeout waiting for Response Available after
				setting DBOB Order Available
			0x02	DBOB and RSVP Interrupt not set as
				expected

Table F-7. Routine 5 - SDDP External Register Diagnostic Error Codes

ROUTINE	TEST	TITLE	ERROR	DESCRIPTION
			CODE
0x05	0x01	SDDP Host I/F Buffer Page Xreg	0x01	Buffer page register data miscompare
		test
0x05	0x02	SDDP Host I/F Buffer Refresh	0x01	Buffer refresh register data miscompare
		Xreg test
			0x02	Error restoring buffer refresh register to initial
				state
0x05	0x03	SDDP Host I/F Packet Header	0x01	Packet header register data miscompare
		Xregs test
			0x02	Error restoring packet header registers to ini-
				tial state

Table F-8. Routine 6 - Data Buffer Diagnostic Error Codes

ROUTINE	TEST	TITLE	ERROR	DESCRIPTION
			CODE
0x06	0x01	Buffer RAM data bus bit test	0x01	Data bus bit miscompare
0x06	0x02	Buffer byte, half, word boundary	0x01	Full word read data miscompare
		test
			0x02	Half word read data miscompare
			0x03	Byte read data miscompare
0x06	0x03	Buffer paging test	0x01	Buffer page data miscompare

F-18 CG00000-011503 REV. A April 1997