Fujitsu M2488 manual Send Diagnostic Factory Mode Field Description

M2488 PRODUCT GUIDE				TAPE UNIT SCSI COMMANDS
	Table 4-114.		SEND DIAGNOSTIC (FACTORY MODE) Field Description (Continued)
BYTE		BIT	VALUE	DESCRIPTION
1		4	1	A Page Format (PF) bit of 1 indicates the SEND DIAGNOSTIC parameters defined
				by ANSI standard X3.131-1994 are used. The PF bit specifies the parameter list con-
				sists of zero or more diagnostic pages and that the data returned by subsequent
				RECEIVED DIAGNOSTIC RESULTS command shall use the diagnostic page for-
				mat.
			0	A PF bit of 0 indicates the SEND DIAGNOSTICS parameters are vendor specific.
				When the Self Test bit is 1, the PF bit can be 0 or 1 and the parameter list length must
				be 0. When the Self Test bit is 0 and the PF bit is 0, the parameter list length must be
				0 or 16.
3-4				The Parameter List Length field specifies the length, in bytes, of the SEND DIAG-
				NOSTIC parameter list to be transferred from the initiator to the target.

Table 4-115. SEND DIAGNOSTIC (FACTORY MODE) CDB Field Description Overview

PAGE	ROUTINE	PF	SELFTEST	DEVOFL	UNITOFL	PARAMETER
CODE						LIST LENGTH
N/A	SelfTest	X	1	X	X	0
00h	-	1	0	X	X	4
80h	01h	1	0	X	X	20
80h	50h	1	0	X	X	20
80h	51h	1	0	X	X	20
80h	52h	1	0	1	1	20
80h	53h	1	0	1	1	20
80h	54h	1	0	1	1	20
80h	57h	1	0	1	1	20
80h	C0h	1	0	1	1	20
80h	C2h	1	0	1	1	20
81h	MFG TEST	1	0	1	1	34
90h-9Fh	MTU TEST	1	0	1	1	34
-	01h	0	0	X	X	16
-	50h	0	0	X	X	16
-	51h	0	0	X	X	16
-	52h	0	0	1	1	16

April 1997 CG00000-011503 REV. A 4-125