Fujitsu M2488 manual Table E-1 CHK xx Error Code Descriptions

M2488 PRODUCT GUIDE			CHK XX ERROR CODES
		Table E-1.	CHK xx Error Code Descriptions (Continued)
	CHK XX		DESCRIPTION
	CODE
	4C	CARTRIDGE UNLOAD TIME OUT
	4D	TAPE UNLOAD TIME OUT
	4E	THREADING TIME WAS TOO FAST
	4F	UNTHREADING TIME WAS TOO FAST
	50	THREADER ARM IS NOT HOME DURING CART. LOADING
	51	FILE PROTECT SENSOR IS ALWAYS OFF (WRITE ENABLE)
	52	FILE REEL DIRECTION ERROR DUE TO LOOSE TAPE WRAP
	53	FILE REEL TURNS TOO FAST DUE TO LOOSE TAPE WRAP
	54	TAPE PATH SENSOR <CT> IS NOT OFF DURING THREADING
	55	FILE REEL DIRECTION ERROR DURING THREADING
	56	FILE REEL TURNS TOO SLOW DURING UNTHREADING
	57	FILE REEL DIRECTION ERROR DURING UNTHREADING
	58	CARTRIDGE \ IN\ OR \ MOUNT\ SENSOR FAILURE
	59	MACHINE REEL TACHOMETER FAILURE IN UNLOAD
	5A	ABNORMAL REEL CLUTCHING DURING LOAD OR TOO LOOSE WRAP
	5B	NO CARTRIDGE OR FILE PROTECT SENSOR ERROR (LD.)
	5C	CARTRIDGE IS NOT LOADING POSITION AT START OF LOAD
	5D	FILE REEL TURNS TOO FAST AFTER UNTHREADING
	5E	MACHINE REEL TURNS TOO SLOW DURING CLEANING
	5F	FILE REEL TURNS TOO FAST DURING CLEANING
	60	MACHINE REEL TACHOMETER PHASE ERROR DURING THREAD/UNTHREAD
	62	MACHINE REEL STOP LOCK ERROR DURING THREAD/UNTHREAD
	63	FILE REEL DIRECTION ERROR WHEN CLEANING
	64	MACHINE REEL DOES NOT TURN DURING POWER UP
	65	MACHINE REEL TACHOMETER OR DIRECTION ERR
	66	FILE REEL DOES NOT TURN IN POWER UP
	67	FILE REEL TACHOMETER OR DIRECTION ERR
	68	FRONT/REAR CARRIER SENSORS BOTH ON
	6A	BACKWARD AT BOT DETECTED BY SERVO
	6B	FORWARD AT EOT DETECTED BY SERVO
	6C	STOP LOCK ERROR CAUSED BY LOOSE WRAP

April 1997 CG00000-011503 REV. A E-3