Fujitsu M2488 manual Dblk

DIAGNOSTIC TESTS AND ERROR CODES

DIAGNOSTIC TESTS AND ERROR CODES M2488 PRODUCT GUIDE

Table F-16. Routine 20 - Loop Write to Read Diagnostic Error Codes (Continued)

ROUTINE	TEST	TITLE	ERROR	DESCRIPTION
			CODE
0x20	0x13	LWR2 - Detect Hard Error - 36	0x40	RSVP did not respond while looking for
		Track		DBOB or IBG.
0x20	0x14	No Signal Test	0xC4	Failed to Detect No Sig TJ
			0xC5	Failed to Detect Write Error TJ
0x20	0x15	LWR3 - External Loop Write to	0x30	Wrap Mark not detected
		Read
			0x32	DBOB TJ not active
0x20	0x16	LWR0 - Seismic CRCA Error	0x01	Failed to Detect IBG - check INLWR or
		Detection		DBLK
			0x02	Failed to Detect DBOB - check DBLK
			0x03	Failed to Detect Phase OK
			0x04	Failed to Detect Preamble - check RDSTT
			0x05	Failed to Detect Postamble
			0x06	Failed to Detect Read End
			0x07	Phase OK not reset
			0x08	Failed to Detect Write Block End
0x20	0x17	LWR2 - Seismic SDFT Data Pat-	0x20	RSVP failed to Respond
		tern
			0x21	DATA Xreg Miscompare - RSVP not Ready
			0x22	DATB Xreg Miscompare - RSVP not Ready
			0x23	FHC1 time-out - DBOB not detected by
				RSVP
			0x24	FLC0 time-out - RSVP detected Long IBG
			0x25	FHC2 or FLC2 Time Out - Slow End of Data
				Block
			0x26	Lost DBOB prior to PHOK or while waiting
				for DPOST
			0x27	PHOK not seen in time
			0x28	Time-out waiting for DPRE
			0x29	Lost DBOB waiting for DPRE
			0x2A	Time-out waiting for DPOST
			0x2B	PHOK on after Read End
			0x2C	RSVP Dead Man time-out

F-64 CG00000-011503 REV. A April 1997