Fujitsu M2488 Total Errors Corrected, Total Read Forward Bytes, Bytes Transferred to Initiator

M2488 PRODUCT GUIDE								TAPE UNIT SCSI COMMANDS
		Table 4-38. Log Sense Page 03h, Error Counter Page - Read (Continued)
					BITS					DEFAULT
	BYTES	7	6	5	4	3	2	1	0	VALUE
	19				Parameter Length					08h
	20-	MSB	Number of Read Data Checks Detected By Firmware (i.e. Errors
	27			corrected with possible delays)					LSB
	TOTAL ERRORS CORRECTED
	28-	MSB			Parameter Code					0003h
	29								LSB
	30	DU	DS=1	TSD=1	ETC=0	TMC=0		0	LP=0	E0h or 60h
	31				Parameter Length					08h
	32-	MSB	Total Read Errors Corrected by Internal Error recovery
	39								LSB
	TOTAL READ (FORWARD) BYTES
	40-	MSB			Parameter Code					0005h
	41								LSB
	42	DU	DS=1	TSD=1	ETC=0	TMC=0		0	LP=0	E0h or 60h
	43				Parameter Length					08h
	44-	MSB		Total Bytes Read from Tape
	51								LSB
	BYTES TRANSFERRED TO INITIATOR
	52-	MSB			Parameter Code					9010h
	53								LSB
	54	DU	DS=1	TSD=1	ETC=0	TMC=0		0	LP=0	E0h or 60h
	55				Parameter Length					08h
	56-	MSB		Total Bytes Transferred to Initiator
	63								LSB
	TOTAL READ BLOCKS THAT WERE RECORDED IN EDRC FORMAT
	64-	MSB			Parameter Code					9011h
	65								LSB
	66	DU	DS=1	TSD=1	ETC=0	TMC=0		0	LP=0	E0h or 60h
	67				Parameter Length					08h
	68-	MSB		Total Blocks Read (excluding filemarks)
	75								LSB
	TOTAL TAPE MARKS READ
	76-	MSB			Parameter Code					9012h
	77								LSB
	78	DU	DS=1	TSD=1	ETC=0	TMC=0		0	LP=0	E0h or 60h

April 1997 CG00000-011503 REV. A 4-41