Fujitsu M2488 manual Factory Settings, Operator Panel Top Level Menus Factory Option

MAINTENANCE AND SERVICING M2488 PRODUCT GUIDE

8-5 FACTORY SETTINGS

The factory menu is used to set options during manufacturing and can be used to view M2488 informa- tion such as serial number, tape motion time, and power-on time. This menu is also used to enable fac- tory mode. The factory settings can only be changed when in factory mode. Entry and use of the factory menu is described in the following paragraphs.

Table 8-22. Operator Panel Top Level Menus - Factory Option

TEST and UNLOAD pressed	TEST and UNLOAD released
* → OFFLINE	→ DIAGMODE
		↓ START
		SETTING
		↓ START
		LOADCODE
		↓ START
		INQUIRY
		↓ START
		MODE PGS
		↓ START
			TEST
		FACTORY	→

Selection and execution of off-	Product Guide
line diagnostics	Section 8-4
Access and configure user	User Guide
settable options	Section 4-2
Copy new firmware from a code	User Guide
image tape cartridge into non-	Section 4-3
volatile memory of M2488.
View M2488 Information	User Guide
	Section 4-4
Display or change selected Tape	User Guide
Unit or Medium-Changer Mode	Section 4-5
Pages
Change factory mode settings,	Product Guide
enable factory mode, or enable	Section 8-5
factory diagnostics.

8-28 CG00000-011503 REV. A April 1997