Fujitsu M2488 manual Diagnostic Tests and Error Codes

DIAGNOSTIC TESTS AND ERROR CODES

DIAGNOSTIC TESTS AND ERROR CODES					M2488 PRODUCT GUIDE
	Table F-14. Routine 12 - EDRC Address Bus Diagnostic Error Codes (Continued)
ROUTINE		TEST	TITLE	ERROR	DESCRIPTION
				CODE
0x12		0x06	SDDP-R20 testing expansion sgd-	0x04	All the data expected to be transferred from
			de, mode 00h		the SPC data_fifo to the SPC receive_buffer
					was not transferred.
				0x05	A non SUCCESS status was returned from
					the function call rm_host_rd_complt. A error
					was detected in the SDDP_HI-hdxs register.
				0x07	A byte for byte miscompare was detected on
					the data bytes stored in the SPC receive
					buffer.
0x12		0x07	SDDP-R20 testing expansion sgc-	0x01	after a write diag operation was initialized in
			ce, mode 10h		the spc chip, the SPC-status register did not
					have one of the following:
					SPC_data_trans_rdy, SPC_busy, or
					SPC_data_reg_empty.
				0x02	when transferring data from the SPC send
					buffer to the SPC data fifo, the SPC-ssig regis-
					ter did not have the expected bits set:
					SCSI_REQ, SCSI_BSY, xfer_phase.
				0x03	when transferring data from the SPC send
					buffer to the SPC data fifo, the SPC-ssig regis-
					ter did not have the expected bits set:
					~SCSI_REQ, SCSI_ACK, SCSI_BSY,
					xfer_phase.
				0x04	A non SUCCESS status was returned from
					the function call rm_request_wrtbuffer.
				0x05	All the data expected to be transferred out of
					the SPC data fifo was not transferred to the
					SDDP.
				0x06	A non SUCCESS status was returned from
					the function call rm_host_wrt_cmplt. A error
					was detected in the SDDP_HI-hdxs register.
				0x07	A byte for byte miscompare was detected on
					the data bytes stored in the data_buffer.
0x12		0x08	SDDP-R20 Read flush testing,	0x01	A host data path end of transfer was not
			mode 00h		detected in the allotted time.
				0x02	when transferring data from the SPC data_fifo
					to the SPC receive_buffer, the SPC-ssig regis-
					ter did not have the expected bits set:
					SCSI_REQ, SCSI_BSY, xfer_phase.
				0x03	when transferring data from the SPC data_fifo
					to the SPC receive_buffer, the SPC-ssig regis-
					ter did not have the expected bits set:
					~SCSI_REQ, SCSI_ACK, SCSI_BSY,
					xfer_phase.

F-42 CG00000-011503 REV. A April 1997