Fujitsu M2488 manual Diagnostic Page Codes PF=1 in Send Diagnostic command CDB

M2488 PRODUCT GUIDE TAPE UNIT SCSI COMMANDS

4-3.19.2 Diagnostic Page Codes (PF=1 in SEND DIAGNOSTIC command CDB)

If the Page Format (PF) bit was set to 1 in a previous SEND DIAGNOSTIC command, the RECEIVE DIAGNOSTIC RESULTS command will return diagnostic result data in paged format with 00h or 80h as the returned Page Code. Refer to Table 4-77 and Table 4-78.

Table 4-77. Diagnostic Page Codes

QUALIFIER	DESCRIPTION
00h	Supported diagnostics pages (see Table 4-79)
80h	Online diagnostic test page (see Table 4-80)

Table 4-78. Receive Diagnostic Results Page, General Form

						BITS
BYTES	7	6	5		4		3	2	1	0
0					Page Code (XXh)
1						Reserved
2-3					Page Length (n-3)
4-N				Diagnostic Parameters

Description of the Page Code 00h

The Page Code 00h instructs the target to make available the list of all supported diagnostic pages to be returned by a subsequent RECEIVE DIAGNOSTIC RESULTS command.

Table 4-79. Page 00h - Supported Diagnostic Pages

						BITS
BYTES	7	6	5		4		3	2	1	0
0					Page Code (00h)
1						Reserved
2-3					Page Length (0002h)
4				Supported page list (00h)
5				Supported page list (80h)

April 1997 CG00000-011503 REV. A 4-85