Fujitsu manual Installation Instructions M2488 Product Guide, Rack-mount Configurations

INSTALLATION INSTRUCTIONS M2488 PRODUCT GUIDE

1-3.1 Rack-mount

There are three configurations for the rack-mount M2488 drive. Refer to Table 1-1 for the assembly instructions to use with your configuration.

Table 1-1. Rack-mount Configurations

CONFIGURATION	EQUIPMENT REQUIRED	TOOLS	ASSEMBLY
			PARAGRAPH
M2488	M2488 (one or two per tray)	Phillips screw-	1-6.1
	IPM (one per M2488)	driver	1-6.2
	Terminator (may be required)		1-6.3
	AC Power Cable (110 or 220 VAC, one per M2488)		1-6.5
	Rack-mount tray
	Front panel for one M2488 or front panel for two M2488s
M2488 with ACL	M2488 (one or two per tray)	Phillips screw-	1-6.1
	IPM (one per M2488)	driver	1-6.2
	Terminator (may be required)	Allen wrench	1-6.3
	AC Power Cable (110 or 220 VAC, one per M2488)		1-6.5
	ACL		1-6.6
	Rack-mount tray for M2488 with ACL
	Front panel for one M2488 with ACL or front panel for
	two M2488s with ACLs
	5 or 10-Cartridge Magazine
M2488 with FACL	M2488 (one or two per tray)	Phillips screw-	1-6.1
	IPM (one per M2488)	driver	1-6.2
	Terminator (may be required)	Allen wrench	1-6.3
	FACL		1-6.5
	AC Power Cable (110 or 220 VAC, one per M2488)		1-6.7
	Rack-mount tray for M2488 with FACL
	Front panel for one M2488 with FACL or front panel for
	two M2488s with FACLs.
	7-Cartridge Magazine (one per FACL)

1-2 CG00000-011503 REV. A April 1997