Fujitsu M2488 manual ~SCSIREQ, SCSIACK, Scsibsy

M2488 PRODUCT GUIDE				DIAGNOSTIC TESTS AND ERROR CODES
Table F-13. Routine 11 - EDRC Data Buffers Diagnostic Error Codes (Continued)
ROUTINE	TEST	TITLE	ERROR		DESCRIPTION
			CODE
0x11	0x01	Write clear 32 bytes walking 1,	0x02		when transferring data from the SPC send
		mode 1Eh			buffer to the SPC data fifo, the SPC-ssig regis-
					ter did not have the expected bits set:
					SCSI_REQ, SCSI_BSY, xfer_phase.
			0x03		when transferring data from the SPC send
					buffer to the SPC data fifo, the SPC-ssig regis-
					ter did not have the expected bits set:
					~SCSI_REQ, SCSI_ACK, SCSI_BSY,
					xfer_phase.
			0x04		A non SUCCESS status was returned from
					the function call rm_request_wrtbuffer.
			0x05		All the data expected to be transferred out of
					the SPC data fifo was not transferred to the
					SDDP.
			0x06		A non SUCCESS status was returned from
					the function call rm_host_wrt_cmplt. A error
					was detected in the SDDP_HI-hdxs register.
			0x07		A byte for byte miscompare was detected on
					the data bytes stored in the data_buffer.
0x11	0x02	Read clear 32 bytes walking 0,	0x01		A host data path end of transfer was not
		mode 0Eh			detected in the allotted time.
			0x02		when transferring data from the SPC data_fifo
					to the SPC receive_buffer, the SPC-ssig regis-
					ter did not have the expected bits set:
					SCSI_REQ, SCSI_BSY, xfer_phase.
			0x03		when transferring data from the SPC data_fifo
					to the SPC receive_buffer, the SPC-ssig regis-
					ter did not have the expected bits set:
					~SCSI_REQ, SCSI_ACK, SCSI_BSY,
					xfer_phase.
			0x04		All the data expected to be transferred from
					the SPC data_fifo to the SPC receive_buffer
					was not transferred.
			0x05		A non SUCCESS status was returned from
					the function call rm_host_rd_complt. A error
					was detected in the SDDP_HI-hdxs register.
			0x07		A byte for byte miscompare was detected on
					the data bytes stored in the SPC receive
					buffer.
0x11	0x03	Write EDRC-NC 32 bytes walk-	0x01		after a write diag operation was initialized in
		ing 1, mode 18h			the spc chip, the SPC-status register did not
					have one of the following:
					SPC_data_trans_rdy, SPC_busy, or
					SPC_data_reg_empty.

DIAGNOSTIC TESTS AND ERROR CODES

April 1997 CG00000-011503 REV. A F-33