M2488 PRODUCT GUIDE MAINTENA NCE AND SER VICING
April 1997 CG00000-011503 REV. A 8-45
8-11.3 IPM Remove and Replace Procedures
Refer to Figure 8-5 for location of the PCA-IPM.
8-11.3.1 IPM Removal
8-11.3.2 IPM Replacement
Figure 8-5. IPM
STEP ACTION
1Disconnect cables and, if applicable, terminator from the two connectors on the IPM.
2Remove the two screws from the IPM.
3 Pull out the IPM.
STEP ACTION
1 Insert the IPM into the rear of the drive.
2 Tighten two screws on the IPM.
3Connect cables and, if applicable, terminator to the connectors.