Fujitsu M2488 manual Log Sense Page 0Ch, Sequential-Access Device

M2488 PRODUCT GUIDE TAPE UNIT SCSI COMMANDS

Table 4-39. Log Sense Page 0Ch, Sequential-Access Device Page

					BITS						DEFAULT
BYTES	7	6		5	4	3		2	1	0	VALUE
0	Reserved					Page Code					0Ch
1					Reserved						00h
2-	MSB				Page Length						003Ch
3										LSB
WRITE DATA BYTES RECEIVED FROM THE INITIATOR
4-	MSB				Parameter Code						0000h
5										LSB
6	DU	DS=1		TSD=1	ETC=0		TMC=0		Reserved	LP=0	E0h or 60h
7					Parameter Length (08h)						08h
8-	MSB	Number of data bytes received from the initiator during Write command
15					operations.					LSB
DATA BYTES WRITTEN TO TAPE
16-	MSB				Parameter Code						0001h
17										LSB
18	DU	DS=1		TSD=1	ETC=0		TMC=0		Reserved	LP=0	E0h or 60h
19					Parameter Length						08h
20-	MSB	Number of data bytes written to tape as a result of Write command oper-
27			ations, not counting ECC and formatting overhead.							LSB
DATA BYTES READ FROM TAPE
28-	MSB				Parameter Code						0002h
29										LSB
30	DU	DS=1		TSD=1	ETC=0		TMC=0		Reserved	LP=0	E0h or 60h
31					Parameter Length						08h
32-	MSB	Number of data bytes read from the tape during Read command opera-
39			tions, not counting ECC and formatting overhead.							LSB
READ DATA BYTES SENT TO THE INITIATOR
40-	MSB				Parameter Code						0003h
41										LSB
42	DU	DS=1		TSD=1	ETC=0		TMC=0		Reserved	LP=0	E0h or 60h
43					Parameter Length						08h
44-	MSB	Number of data bytes sent to the initiator during Read command opera-
51					tions.					LSB

CLEANING REQUIRED

April 1997 CG00000-011503 REV. A 4-43