Fujitsu M2488 manual Diagnostic Tests and Error Codes

DIAGNOSTIC TESTS AND ERROR CODES

DIAGNOSTIC TESTS AND ERROR CODES				M2488 PRODUCT GUIDE
Table F-13. Routine 11 - EDRC Data Buffers Diagnostic Error Codes (Continued)
ROUTINE	TEST	TITLE	ERROR	DESCRIPTION
			CODE
0x11	0x07	Write EDRC-NC 32 bytes walk-	0x02	when transferring data from the SPC send
		ing 1, mode 14h		buffer to the SPC data fifo, the SPC-ssig regis-
				ter did not have the expected bits set:
				SCSI_REQ, SCSI_BSY, xfer_phase.
			0x03	when transferring data from the SPC send
				buffer to the SPC data fifo, the SPC-ssig regis-
				ter did not have the expected bits set:
				~SCSI_REQ, SCSI_ACK, SCSI_BSY,
				xfer_phase.
			0x04	A non SUCCESS status was returned from
				the function call rm_request_wrtbuffer.
			0x05	All the data expected to be transferred out of
				the SPC data fifo was not transferred to the
				SDDP.
			0x06	A non SUCCESS status was returned from
				the function call rm_host_wrt_cmplt. A error
				was detected in the SDDP_HI-hdxs register.
			0x07	A byte for byte miscompare was detected on
				the data bytes stored in the data_buffer.
0x11	0x08	Read, EDRC-NC 32 bytes walk-	0x01	A host data path end of transfer was not
		ing 0, mode 04h		detected in the allotted time.
			0x02	when transferring data from the SPC data_fifo
				to the SPC receive_buffer, the SPC-ssig regis-
				ter did not have the expected bits set:
				SCSI_REQ, SCSI_BSY, xfer_phase.
			0x03	when transferring data from the SPC data_fifo
				to the SPC receive_buffer, the SPC-ssig regis-
				ter did not have the expected bits set:
				~SCSI_REQ, SCSI_ACK, SCSI_BSY,
				xfer_phase.
			0x04	All the data expected to be transferred from
				the SPC data_fifo to the SPC receive_buffer
				was not transferred.
			0x05	A non SUCCESS status was returned from
				the function call rm_host_rd_complt. A error
				was detected in the SDDP_HI-hdxs register.
			0x07	A byte for byte miscompare was detected on
				the data bytes stored in the SPC receive
				buffer.
0x11	0x09	Read EDRC32 bytes walking 0,	0x01	A host data path end of transfer was not
		mode 00h		detected in the allotted time.

F-36 CG00000-011503 REV. A April 1997