Fujitsu M2488 manual Diagnostic Tests and Error Codes

M2488 PRODUCT GUIDE				DIAGNOSTIC TESTS AND ERROR CODES
Table F-12. Routine 10 - EDRC Control Signals Diagnostic Error Codes (Continued)
ROUTINE	TEST	TITLE	ERROR		DESCRIPTION
			CODE
0x10	0x02	Read clear 3 bytes 00, mode 0Eh	0x05		A non SUCCESS status was returned from
					the function call rm_host_rd_complt. A error
					was detected in the SDDP_HI-hdxs register.
			0x07		A byte for byte miscompare was detected on
					the data bytes stored in the SPC receive
					buffer.
0x10	0x03	Write EDRC-NC 3 bytes 00,	0x01		after a write diag operation was initialized in
		mode 18h			the spc chip, the SPC-status register did not
					have one of the following:
					SPC_data_trans_rdy, SPC_busy, or
					SPC_data_reg_empty.
			0x02		when transferring data from the SPC send
					buffer to the SPC data fifo, the SPC-ssig regis-
					ter did not have the expected bits set:
					SCSI_REQ, SCSI_BSY, xfer_phase.
			0x03		when transferring data from the SPC send
					buffer to the SPC data fifo, the SPC-ssig regis-
					ter did not have the expected bits set:
					~SCSI_REQ, SCSI_ACK, SCSI_BSY,
					xfer_phase.
			0x04		A non SUCCESS status was returned from
					the function call rm_request_wrtbuffer.
			0x05		All the data expected to be transferred out of
					the SPC data fifo was not transferred to the
					SDDP.
			0x06		A non SUCCESS status was returned from
					the function call rm_host_wrt_cmplt. A error
					was detected in the SDDP_HI-hdxs register.
			0x07		A byte for byte miscompare was detected on
					the data bytes stored in the data_buffer.
0x10	0x04	Read EDRC-NC 3 bytes 00, mode	0x01		A host data path end of transfer was not
		08h			detected in the allotted time.
			0x02		when transferring data from the SPC data_fifo
					to the SPC receive_buffer, the SPC-ssig regis-
					ter did not have the expected bits set:
					SCSI_REQ, SCSI_BSY, xfer_phase.
			0x03		when transferring data from the SPC data_fifo
					to the SPC receive_buffer, the SPC-ssig regis-
					ter did not have the expected bits set:
					~SCSI_REQ, SCSI_ACK, SCSI_BSY,
					xfer_phase.
			0x04		All the data expected to be transferred from
					the SPC data_fifo to the SPC receive_buffer
					was not transferred.

DIAGNOSTIC TESTS AND ERROR CODES

April 1997 CG00000-011503 REV. A F-27