Fujitsu M2488 manual Diagnostic Tests and Error Codes

M2488 PRODUCT GUIDE					DIAGNOSTIC TESTS AND ERROR CODES
	Table F-10. Routine 8 - Formatter Counters Diagnostic Error Codes (Continued)
ROUTINE		TEST	TITLE	ERROR		DESCRIPTION
				CODE
0x08		0x01	Formatter Counter 0 test	0x0A		The low byte count for Formatter Counter 0
						did not contain the expected value after the
						counter finished running
				0x0B		Test Jump Carry Out bit for the low byte
						count of Formatter Counter 0 was not set as
						expected after the counter finished running
				0x0C		WBEND_CNEH0 Interrupt not set as
						expected
0x08		0x02	Formatter Counter 1 test	0x01		The Formatter Counter 1 count enable register
						could not be cleared
				0x02		A data miscompare occurred walking a one
						through the Formatter Counter 1 high byte
						count register
				0x03		A data miscompare occurred walking a one
						through the Formatter Counter 1 low byte
						count register
				0x04		Test Jump Carry Out bit for the high byte
						count of Formatter Counter 1 was set prema-
						turely before counter was started
				0x05		An unexpected value was read in the count
						enable register for Formatter Counter 1 after
						the high byte counter finished running
				0x06		The high byte count for Formatter Counter 1
						did not contain the expected value after the
						counter finished running
				0x07		Test Jump Carry Out bit for the high byte
						count of Formatter Counter 1 was not set as
						expected after the counter finished running
				0x08		Test Jump Carry Out bit for the low byte
						count of Formatter Counter 1 was set prema-
						turely before counter was started
				0x09		An unexpected value was read in the count
						enable register for Formatter Counter 1 after
						the low byte counter finished running
				0x0A		The low byte count for Formatter Counter 1
						did not contain the expected value after the
						counter finished running
				0x0B		Test Jump Carry Out bit for the low byte
						count of Formatter Counter 1 was not set as
						expected after the counter finished running
0x08		0x03	Formatter Counter 2 test	0x01		The Formatter Counter 2 count enable register
						could not be cleared

DIAGNOSTIC TESTS AND ERROR CODES

April 1997 CG00000-011503 REV. A F-23