Fujitsu M2488 manual Unit Attention

M2488 PRODUCT GUIDE			MEDIA CHANGER COMMANDS
SENSE KEY	CONDITION		DESCRIPTION
6h	UNIT ATTENTION	Indicates the MODE SENSE command was not performed due to
		one of the following:
		1.	The tape cartridge may have been changed.
		2.	The target has been reset.
		3.	The Mode parameters have been changed by another initiator.
		4.	The version of the microcode has been changed (microcode
			downloaded).
		5.	A cartridge was loaded with a tape length that is too long or too
			short.
Bh	ABORTED COMMAND	MODE SENSE command was aborted.
Dh	VOLUME OVERFLOW	Write of buffered data prior to the MODE SENSE operation failed
		because physical End-of-Tape has been reached.

March 1997 CG00000-011503 REV. A 6-15