Fujitsu M2488 manual Diagnostic Tests and Error Codes

M2488 PRODUCT GUIDE				DIAGNOSTIC TESTS AND ERROR CODES
	Table F-8. Routine 6 - Data Buffer Diagnostic Error Codes (Continued)
ROUTINE	TEST	TITLE	ERROR		DESCRIPTION
			CODE
0x06	0x04	Buffer RAM address bus bit test	0x01		Address bus bit miscompare, possible open
					address bit(s)
			0x02		Address bus bit miscompare, possible short/
					tied address bit(s)
0x06	0x05	Buffer RAM 0xAA data pattern	0x01		Data miscompare error
		test
0x06	0x06	Buffer RAM 0x55 data pattern	0x01		Data miscompare error
		test
0x06	0x07	Buffer RAM walking one's test	0x01		Data miscompare error
0x06	0x08	Buffer RAM incremental pattern	0x01		Data miscompare error
		test

DIAGNOSTIC TESTS AND ERROR CODES

Table F-9. Routine 7 - SCSI Protocol Controller Diagnostic Error Codes

ROUTINE	TEST	TITLE	ERROR	DESCRIPTION
			CODE
0x07	*	SPC Routine Initialization	0xD0	SPC register initialization failed
			0xE0	SPC did not generate an interrupt request
			0xE1	SPC interrupt was not detected at the Interrupt
				Request Controller
			0xE2	The SPC interrupt was cleared while clearing
				the Interrupt Request Controller.
			0xE3	SPC interrupt/step code did not report Com-
				mand Complete
			0xE4	The SPC interrupt request could not be
				cleared
			0xE5	SPC did not generate an interrupt request
			0xE6	SPC interrupt was not detected at the Interrupt
				Request Controller
			0xE7	The SPC interrupt was cleared while clearing
				the Interrupt Request Controller.
			0xE8	SPC interrupt/step code did not report Diag-
				nostic Self-Test passed
			0xE9	The SPC interrupt request could not be
				cleared
			0xEF	SPC interrupt request or interrupt/step register
				could not be cleared at the end of the test

April 1997 CG00000-011503 REV. A F-19